Stop Wasting Time and Money on Single Connectors

You know the drill. You’re in the middle of a light bar or pod light install, and you need a clean, reliable connection. You dig through the bin, find one pigtail, and then spend ten minutes looking for its mate. This pack ends that. We’re giving you 131 identical, high-quality male 2-prong pigtail harnesses in one shot. This is for the installer who values efficiency and doesn’t want to run to the parts store every other job. At well under a buck-fifty per reliable connection, it’s the smart buy.

What You Get in the Box

• Quantity: 131 individual male 2-prong pigtail harnesses.
• Wire: Durable black PVC jacket. Good flexibility, resists cracking in engine bay heat and cold.
• Terminal Spacing: 8 inches between the male bullet connectors. This is a critical spec—it gives you enough slack to work with, allows for proper routing, and matches the spacing on many aftermarket LED light plugs.
• Connectors: Standard 0.110″ (2.8mm) male bullet plugs. These are the industry-standard size for a huge range of auxiliary lighting, not some proprietary junk.
• Color Code: One red wire (typically for positive/+), one black wire (typically for negative/-). It doesn’t get simpler.

Where This Harness Gets the Job Done

This isn’t a niche part. This is a fundamental component for any 12V accessory wiring. Think of it as the “missing link” between your switch/relay wiring and the light itself.

• Primary Use: Direct connection to our Single Female Pigtail Harnesses (S608, S610, S612). You solder or crimp our female pigtail to your vehicle’s main wiring, and this male pigtail plugs right into it. This creates a clean, plug-and-play disconnect point right at your LED light, pod, or rock light.
• Dual Function Lights: Specifically designed for wiring dual-function (e.g., White/Amber) LED lights. You use one of these male harnesses for each color circuit (one for white, one for amber), and then plug both into a dual female connector. We have the mating parts you need.
• General Purpose 12V Connections: Need a quick, solid male connector for any low-amp 12V accessory? Fog light, interior light, compressor trigger wire—this works. The 8″ lead gives you options.
• Shop Life-Saver: Keep a bundle of these on your shop wall. When a customer needs a new connector for a damaged light wire, you have it in seconds. No waiting, no minimum order from a distributor.

Straight Talk on Installation

This is basic wiring, but doing it right matters.

1. Prepare Your Main Harness: Run your power and ground wires from your relay or switch to where the light will be mounted.
2. Attach the Female Side: Take one of our matching Single Female Pigtail Harnesses. Connect its wires to your main power and ground wires using solder and heat shrink or high-quality crimp connectors. Tape or loom the connection.
3. Attach This Male Side: Take one of these male pigtails from this pack. Connect its red wire to the positive (+) wire on your LED light. Connect its black wire to the negative (-) wire on the light. Again, solder and heat shrink is the gold standard.
4. Plug and Play: Connect the male plugs into the female sockets. It’s a positive click. Now you have a professional, serviceable connection. If you need to remove the light, just unplug it.

Tool Tip: Use a proper crimper for insulated terminals, or a soldering iron. Don’t just twist and tape it. We’re not animals.

Why This Pack Beats the “Other Guys”

• Bulk Value: Buying connectors one or five at a time kills your margin and your time. This pack covers dozens of jobs.
• Consistent Quality: Every harness in this batch is the same. No worrying about a bad crimp or thin wire gauge in one of them.
• Correct Spacing: The 8″ lead is intentional. Shorter leads are frustrating and put stress on the connection. Longer leads are wasteful and create a mess of excess wire to manage. This is the right length.
• It’s Simple: We’re not selling you a “revolutionary connectivity solution.” We’re selling you 131 pieces of a simple, proven component that you need to finish jobs right and make money.

Technical Specifications

Specification

Reviews There are no reviews yet. Be the first to review “Male 2 Prong Pigtail Wire Harness with 8″ Connector Spacing – 131 Plugs” Cancel reply Your email address will not be published. Required fields are marked * Your rating * Rate… Perfect Good Average Not that bad Very poor Your review * Name * Email * Save my name, email, and website in this browser for the next time I comment. Related products Triple Female Pigtail Wire Harness with 8″ Connector Spacing – 131 Plugs $1.10 Add to cart Single Female Pigtail Wire Harness with 10″ Connector Spacing – 110 Plugs $1.10 Add to cart Triple Female Pigtail Wire Harness with 10″ Connector Spacing – 110 Plugs $1.10 Add to cart You're viewing: Male 2 Prong Pigtail Wire Harness with 8″ Connector Spacing – 131 Plugs $1.10 Add to cart